Prof. Li's team finds chemical etch method to help transistors stand tall

9/28/2016 Liz Ahlberg, UI News Bureau

University of Illinois researchers, including ECE Professor Xiuling Li, have developed an etching technique that addresses many problems in trying to create 3-D devices.

Written by Liz Ahlberg, UI News Bureau

Smaller and faster has been the trend for electronic devices since the inception of the computer chip, but flat transistors have gotten about as small as physically possible. For researchers pushing for even faster speeds and higher performance, the only way to go is up.

Xiuling Li
Xiuling Li

University of Illinois researchers have developed a way to etch very tall, narrow finFETs, a type of transistor that forms a tall semiconductor “fin” for the current to travel over. The etching technique addresses many problems in trying to create 3-D devices, typically done now by stacking layers or carving out structures from a thicker semiconductor wafer.

“We are exploring the electronic device roadmap beyond silicon,” said Xiuling Li, an ECE ILLINOIS professor and the leader of the study. Li also is affiliated with the Micro and Nanotechnology Laboratory at Illinois. “With this technology, we are pushing the limit of the vertical space, so we can put more transistors on a chip and get faster speeds. We are making the structures very tall and smooth, with aspect ratios that are impossible for other existing methods to reach, and using a material with better performance than silicon.”

The team published the results in the journal Electron Device Letters.

Typically, finFETs are made by bombarding a semiconductor wafer with beams of high-energy ions. This technique has a number of challenges, Li said. For one, the sides of the fins are sloped instead of straight up and down, making them look more like tiny mountain ranges than fins. This shape means that only the tops of the fins can perform reliably. But an even bigger problem for high-performance applications is how the ion beam damages the surface of the semiconductor, which can lead to current leakage.

An array fin transistors made by the MacEtch method. The fins are tall and thin, with a higher aspect ratio and smoother sides than other methods can produce. Image by Yi Song
An array fin transistors made by the MacEtch method. The fins are tall and thin, with a higher aspect ratio and smoother sides than other methods can produce. Image by Yi Song

The Illinois technique, called metal-assisted chemical etching or MacEtch, is a liquid-based method, which is simpler and lower-cost than using ion beams, Li said. A metal template is applied to the surface, then a chemical bath etches away the areas around the template, leaving the sides of the fins vertical and smooth.

“We use a MacEtch technique that gives a much higher aspect ratio, and the sidewalls are nearly 90 degrees, so we can use the whole volume as the conducting channel,” said ECE ILLINOIS graduate student Yi Song, the first author of the paper. “One very tall fin channel can achieve the same conduction as several short fin channels, so we save a lot of area by improving the aspect ratio.”

The smoothness of the sides is important, since the semiconductor fins must be overlaid with insulators and metals that touch the tiny wires that interconnect the transistors on a chip. To have consistently high performance, the interface between the semiconductor and the insulator needs to be smooth and even, Song said.

Right now, the researchers use the compound semiconductor indium phosphide with gold as the metal template. However, they are working to develop a MacEtch method that does not use gold, which is incompatible with silicon.

“Compound semiconductors are the future beyond silicon, but silicon is still the industry standard. So it is important to make it compatible with silicon and existing manufacturing processes,” Li said.

A cross-sectional microscope image of a fin transistor. The indium phosphate semiconductor fin is overlaid with insulators and metals to make a working transistor. Image by Yi Song
A cross-sectional microscope image of a fin transistor. The indium phosphate semiconductor fin is overlaid with insulators and metals to make a working transistor. Image by Yi Song

The researchers said the MacEtch technique could apply to many types of devices or applications that use 3-D semiconductor structures, such as computing memory, batteries, solar cells and LEDs.

The National Science Foundation, the International Institute for Carbon-Neutral Energy Research (I2CNER), and Lam Research supported this work. The co-authors of this work include Illinois postdoctoral researcher Parsian Mohensi (now a professor at the Rochester Institute of Technology) and graduate student Seung Hyun Kim; Jae Cheol Shin, a professor at Yeungnam University in South Korea; Tatumi Ishihara, a professor at I2CNER in Japan; and Ilesanmi Adesida, an ECE ILLINOIS professor.


Share this story

This story was published September 28, 2016.